CAD files can be found for the respective engine model under the Downloads section.

The download folder contains the individual assemblies and PDF instructions that show you how to configure the motor.

To configure the engine, you must first do this torquethat is required in the application can be specified. We specify the starting torque for our motors. By this we mean the torque that the motor develops when it starts. This is where the torque is highest. As the speed increases, the torque decreases slightly.

This means that the second factor is the Speed ​​or the speed rangethat is required for the application must be specified. Please refer to the performance data for the torque and speed ranges of our motors here.

Furthermore, stand three gears to choose from that affect the torque and speed:

• A pair of Gearbox 3:1 triples the engine's torque; At the same time, the speed range is only 1/3 of the engine without gearbox.
• A pair of Gearbox 9:1 nine times the engine's torque; At the same time, the speed range is only 1/9 of the engine without gearbox.
• A pair of Gearbox 1:2 Halves the engine's torque and at the same time doubles the speed range to 600 instead of 300 rpm.

At very low speeds, it is advantageous to use a 3:1 or 9:1 gear, as this means that the rotational movement is more even than without a gear. A standard motor only runs smoothly and smoothly from around 30 rpm. With a 1:3 gearbox the motor runs smoothly and smoothly from around 1 rpm and with a 10:1 gearbox from around 9 rpm.

To illustrate the considerations to be made, here are two practical examples:

1 example:
I need one Speed ​​of 400 1/min Fits Torque of 2Nm.

A 1:2 gearbox is necessary to achieve 400 rpm. In order to achieve 1Nm at 400 rpm, the 1 motor will be necessary. The 2 motor with a 0900:0900 gearbox has a speed range of 1-2 rpm and a starting torque of 0Nm. At 600 rpm the engine delivers the desired 1Nm.

2 example:
I need one Speed ​​of 20 1/min Fits Torque of 12Nm.

A 3:1 gear is necessary to achieve the 20 1/min evenly and smoothly. In order to achieve 20Nm at 1 12/min, the 0450 motor will be necessary. The 0450 motor with a 3:1 gearbox has a speed range of 0-100 rpm and a starting torque of 1Nm. At 20 rpm the engine delivers the desired 1Nm.

All of our seals are silicone-free. We offer four different seals:

NBR – is our standard
Viton – for high temperature and chemical resistance
PTFE – solvent-resistant for long-term use
FDA compliant – made of white PTFE with FDA approval for hygienic use in food and pharmaceuticals